E-CMD

The E-CMD provides continuous air monitoring to detect carbon monoxide in the surrounding environment. When connected to an environmental monitoring system, the sensors will send an alert message to the administrator if the carbon monoxide levels go outside of the threshold. The sensor is powered by the environmental monitoring system and does not require an external power supply.

• Continuous air monitoring.

• Pre-set alarm points alert at:

• 70 ppm after 60 to 240 minutes

• 150 ppm after 10 to 50 minutes

• 400 ppm after 4 to 15 minutes

• Flush or surface mount.

• Test functionality of electrochemical CO sensing cell.

• Connect to RJ45 or digital input sensor ports.

• Screw terminal

• To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.

• Maximum cable length: 1000 ft (305m)

• LED indicators for operation status and system test.

• Current consumption: 40mA @ 12VDC.

• Powered by E-2D/5D/16D.

• Regulatory approvals: UL

Key Features:

• Continuous air monitoring.
• Flush or surface mount.
• Test functionality of electrochemical CO sensing cell.
• Connect to RJ45 or digital input sensor ports.
• LED indicators for operation status and system test.