ST-IPFOHD-LC-ULC

Extend a 1080p HDMI display up to 40km away from the source via fiber optic cable, and broadcast real-time HDMI signals to multiple display locations with an SFP network switch, all with the XTENDEX® ST-IPFOHD-LC-ULC. 

The XTENDEX® HDMI Extender Over IP via Fiber Optic Cable transmits digital video, embedded audio, and IR signals up to 40 kilometres away from an HDMI source using a single LC singlemode fiber optic strand or 300 metres using OM3 LC multimode fiber optic cable.

Each HDMI Extender Over IP consists of a local unit that connects to an HDMI source and also supplies video to a local monitor, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via Fiber Optic Cable or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch.

HDMI features supported:

• HDMI 1.3

• 36-bit Deep Color

• RGB, YCbCr 4:4:4, and YCbCr 4:2:2

• LPCM

• Bandwidth up to 4.46 Gbps

For a point-to-many connection, a standalone network with an unmanaged SFP network switch, hub, or router can be used instead of a managed SFP network switch.

• Easily expandable. Add remote units as you add monitors.

• Up to 253 receivers supported.

• It is not recommended to use any other network devices on this standalone network as it may cause degradation in performance.

Support for multiple transmitters (many-to-many connection) requires a managed SFP switch with VLAN support. Standard LAN switches can only support one transmitter.

• The managed SFP switch must support port-based IEEE 802.1Q VLAN.

• Each VLAN acts as a separate HDMI Over IP Channel on the network.

• Each VLAN channel supports one transmitter.

• Number of local and remote units that can be used is dependent on the backplane bandwidth of the switch.

Point-to-Point Connection

Point-to-Many Connections Using an Unmanaged Gigabit SFP Switch

Many-to-Many Connections Using a Managed Gigabit SFP Switch

Key Features:

• Signal transmission via single-strand LC fiber optic cable. Using singlemode 9-micron cable, extend to 40km. Using 50-micron OM3 (or better) multimode cable, extend to 300m.
• Supports HDTV resolutions to 1080p.
• Cascade network switches to extend the length longer distances. Up to three switches can be cascaded.
• HDCP 1.4 compliant.
• Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control.
• Plug and play installation allows receivers to find the transmitters automatically on the same subnet.
• Local and remote units must be in the same LAN. The units do not support WAN connections.
• Buffered HDMI input loop-through.
• Low RFI/EMI for sensitive applications.
• Built-in default EDID table.
• Cables can be installed in conduit prior to extender installation.
• Integrated mounting brackets for easy surface/wall mounting.