E-LLS-PF

Key Features:

• Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
• Configure for normally open: When installed on top of the tank and used for sensing when liquid rises to a certain level (default setting), the sensor will be "normally closed" and will open when the liquid reaches that level.
• IP68-rated water and dust protection.
• Max pressure: 72.5 psi (0.5 MPa)
• Float specific gravity: 0.7
• Material: Float: PVDTStem: PP
• Cable length: 15.75 in (40 cm)
• Wire gauge: 24 AWG
• Includes two gel-filled butt splice connectors for extending the cable length up to 1,000 feet.
• Float Diameter: 0.75 in (19 mm)
• Configure for normally closed: When installed on the bottom of the tank and used for sensing the drop in the liquid level beyond a certain point, the sensor will be "normally open" and will close when the liquid drops to that level.
• Connect to digital input or RJ45 sensor port on an E-2D/5D/16D: To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor cables using the included butt splice connectors.
• Stem length: 2 in (51 mm)
• Operating temperature: -4 to 176°F (-20 to 80°C).
• Electrical rating: AC 220V/1A; DC 24V/0.5A
• Mounting thread: M8x1.25
• Single-pole single-throw (SPST) circuitry
• Vertically mounted float switch – install in the top or bottom of the tank (inside of the tank).