Interworld Electronics has release the SPLITMUX-C5HDR-4LC HDMI Quad Screen Multiviewer from Network Technologies Incorporated.

The SPLITMUX-C5HDR-4LC is a Low-Cost HDMI Quad Screen Multiviewer that allows you to simultaneously display real-time HDMI/DVI video from four different sources on a single monitor. The SPLITMUX-C5HDR-4LC is capable of displaying the video sources in Quad mode – four sources displayed simultaneously in four quadrants, PiP mode – a selected source overlayed on top of a full screen source, or Full Screen mode – a selected source display full screen. The SPLITMUX-C5HDR-4LC is capable of scaling the video signals to match the screen resolution making the input video independent of the video out resolution. Different resolution video signals can be applied to each input. The output video brightness, contrast, colour, and sharpness can be adjusted.

The SPLITMUX-C5HDR-4LC provides fluid, real-time video performance with 60 frames per second (fps) in all four quadrants. In Quad mode the audio output can be switched independently allowing the user to select the audio from any of the connected HDMI sources.

Two Video outputs are provided. The local HDMI output allows HDMI or DVI monitors to be directly connect to the multiviewer. The remote output allows the audio/video output to be extended up to 250 feet away via a single CAT6/6a/7 cable. . Bi-directional IR control from the multiviewer and from remote unit locations is supported.

The SPLITMUX-C5HDR-4LC supports HDTV resolutions up to 1080p and computer resolutions to 1920x1200.

HDMI features include:
  • 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr inputs formats and 24- and 30-bit sRGB output formats,
  • Four-channel non-mixing stereo with 16-, 20-, or 24-bit uncompressed PCM audio,
  • Bandwidth up to 165 MHz with Input bit rates up to 2.25 Gbps and output bit rates up to 2.0625 Gbps.
The SPLITMUX-C5HDR-4LC can be controlled through front panel buttons, IR remote, or Graphical User Interface (GUI) via RS232. In addition the SPLITMUX-C5HDR-4LC multiviewers can be cascaded to display video from any number of video sources on a single screen. Cascaded outputs can be extended using the remote unit as long as the combined total CAT6/6a/7 cable length between all levels of the cascade does not exceed 250 feet.

For More Information or to Request a Quote Contact Interworld Electronics