Interworld Electronics has released the ST-IPHDMI-2G HDMI Over Gigabit IP Extender from Network Technologies Inc. Each HDMI Over IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display.

In point-to-point configuration one ST- ST-IPHDMI-L-2G transmits digital video and audio signals to one ST-IPHDMI-R-2G receiver up to 333 feet away using a single CAT5e/6/7 cable. Point-to-point connections also allow optional IR control of the video source from the remote display location. In a multi-cast configuration one ST-IPHDMI-L-2G transmits HDMI signals to more than one ST-IPHDMI-R-2G receiver using VLAN isolation via a managed network switch.

Standard LAN switches can only support one transmitter. To support for multiple transmitters a Managed Network Switch with VLAN/IGMP support is required. In this case the managed switch must support port based IEEE 802.1Q VLAN, IGMP, and permit duplicate IP addresses across the VLAN domains. Each VLAN then acts as a separate HDMI Over IP Channel on the network. A PC can be used to access the built-in HTTP Interface of the managed network switch to control which signal is being watched at each location.

The ST-IPHDMI-2G supports HDTV resolutions to 1080p and computer resolutions to 1920x1200. The ST-IPHDMI is compliant with HDMI 1.3 and HDCP high definition TV standards and also supports Linear PCM and Dolby Digital 5.1 audio through HDMI compatible TVs or audio receivers.

ST-IPHDMI-2G HDMI Over Gigabit IP



For More Information Contact Interworld Electronics