The new digital relay cards are additions to the ICS Advent family of relay and isolated input cards. These cards are PCI solutions for digital control in applications such as test equipment, process control, audio switching, satellite/microwave network control and analog multiplexing where on-board relays are required and inputs must be isolated.
The digital TTL card is a general-purpose card for digital I/O applications. The 16REL-PCI model features include 16 Reed Relay Outputs (10 VA Resistive Load), DB-37 Connector for all 16 Outputs and non-destructive read-back capability. The DIO16-PCI model offers eight Reed Relay Outputs (10 VA Resistive Load), eight Optically Isolated AC or DC Inputs (6-12 VAC/DC Range), DB-37 Connector for all eight Inputs and eight Outputs, and non-destructive read-back capability.
Sealevel’s DIO32-PCI digital relay card takes only one PCI slot and features 16 Reed Relay Outputs (10 VA Resistive Load) and 16 Optically Isolated AC or DC Inputs (6-12 VAC/DC Range). This card also has a breakout shielded cable that goes from the high density connector on the rear of board to two DB37 connectors with male for outputs and female for isolated inputs.
The model DIO24H-PCI is a general purpose, 24-bit, digital I/O adaptor for the PC and AT/386 compatible computers. Two of its most important features are its high current output (ISink =64 mA) and its ability to share a single IRQ line with multiple boards in the same PC.
All four of Sealevel’s new digital cards are PCI 2.1 Compliant (seen past bridge) and offer DOS/WIN 3.1/95/98/NT/2000 I/O support, as well as Plug & Play capability.
For More Information Contact Interworld Electronics