Vlinx™ VESR900 Series Industrial Optical Fibre Ethernet Serial Servers allow you to monitored and control Serial Devices from any point on your Optical Fibre or Copper Ethernet LAN/WAN. Maintain maximum productivity without leaving your office. The easy to use Vlinx™ Manager software provides remote access to your device servers and serial ports directly from your desktop computer or laptop. Configure devices, upgrade firmware and monitor activity using the Vlinx built-in web server.

Multiple optical fibre options make integration into any existing networks quick and easy. No need to purchase an extra media converter when you can choose from multi-mode SC/ST, 15km single-mode SC/ST, 40 km single-mode SC/ST, or 80 km single-mode SC/ST.

The VESR900 Series includes single and dual port models with support for RS-232 and RS-422/485 protocols. Virtual com port drivers can be installed on workstations allowing applications to access the remote com ports or serial data can be sent directly to the device servers IP address. Paired mode is also available allowing data to be sent directly from one device server to another via the network.

VESR900 Series device servers provide both DB9 serial connectors and screw terminal blocks for cable termination. The VESR92x series servers also feature an additional copper RJ45 port that allows you to connect another Ethernet device or PC workstation. This Pass-through port functions much like an unmanaged Ethernet switch.

If the Vlinx™ device server losses connectivity a manual reboot is not needed to restore communications. The Vlinx™ attempts to reconnect every five seconds until the connection is re-established. This heartbeat connectivity signal keeps the serial servers online. VESR9xx Series device servers are ultra-compact measuring only 17 x 11 x 4cm. Optional DIN rail mounting brackets are also available.


For More Information or to Request a Quote Contact Interworld Electronics